|
Product Details:
Contact Now
Chat Now
|
| Modulation: | TDD OFDM/ COFDM | RF Power: | 10W |
|---|---|---|---|
| Frequency: | 1428~1468MHz,1420~1530MHz | Management: | Web UI And Control Uart |
| RF Transmission Range: | Up To 150km | OEM/ODM: | Support |
| Highlight: | UAV HDMI SDI video transmitter,150km Ethernet video transmitter,UAV long-range video data transmission |
||
The HCL553 UAV video transmitter is engineered for long-range wireless video and data transmission with bidirectional communication capabilities. Operating in the 1.4GHz frequency bands and featuring frequency hopping spread spectrum (FHSS) technology, it ensures stable and reliable signal communication for demanding UAV applications.
| Model Number | HCL553 |
|---|---|
| Product Name | Ethernet/AV/HDMI/SDI Input Video Transmitter For 150km UAV Video Data Transmission |
| Modulation | TDD OFDM |
| Frequency | 1428~1468MHz, 1420~1530MHz |
| FHSS | Support |
| Bandwidths | 1.4/3/5/10/20MHz |
| Throughput | Maximum 30Mbps@20MHz |
| RF Transmission Power | 10W (40~42 dBm) |
| Constellation | QPSK, 16QAM, 64QAM self adaption |
| Sensitivity | -108dBm (1Mbps) |
| Ethernet Ports | 2 * Ethernet ports |
| Serial Ports | 3 channels, RS232/TTL/Sbus optional |
| Transmission Range | Maximum 150km (UAV to Ground) |
| Control By | Web UI and Control Uart |
| Encryption | AES128 |
| Networking Mode | Point to Point, Point to Multipoint, Relay |
| Movement Speed | Support no less than 300km/h |
| Power Input | 24~30V, 28V as default |
| Power Consumption | <28W (RF Power 10W) |
| Dimensions | 118.5 * 61.4 * 29mm |
| Weight | 232g |
| I/O | Description |
|---|---|
| Ethernet 1 | 4Pin ZH1.5mm connector, bridged with Ethernet2 |
| Ethernet 2 | RJ45 connector, bridged with Ethernet1 |
| Uart*3 | 3Pin GH1.25mm lockable connector*3, 3 channel uart, RS232/TTL/Sbus optional |
| Power in | XT30PW-M connector |
| ANT 1 | Tx/Rx Antenna port, SMA female |
| ANT 2 | Rx Antenna port, SMA female |
Yes, the default video input is IP RJ45 Ethernet port. If your camera only has HDMI, SDI, AHD or AV output, you need to purchase our mini encoder device to encode the video and audio signal into digital data for transmission. At the receiver end, you can connect it directly to your computer or NVR. If you want to output to an HDMI monitor, you can also purchase our decoder device to convert the digital data back into HDMI video and audio signals.
Contact Person: Miss. Angela
Tel: +8613714176982