Product Details:
Contact Now
Chat Now
|
Modulation: | QPSK Modulation LDPC Coding | Air-to-ground LOS(light Of Sight) Distance: | ≥30km |
---|---|---|---|
High Sensitivity: | -114dBm@125kHz | RF Power: | 500mW(27dBm) |
Encryption: | 128-bit Encryption | Size: | 53*53*17.3mm |
Highlight: | 500mW Mesh Network Radio,Military Mesh Network Radio,500mW radio data transmitter |
This high-performance mesh radio enables centerless long-distance communication between large-scale nodes, allowing all nodes to communicate independently without interference.
Designed for military applications, it supports large-scale dense node access to wireless transmission, dynamic networking, and flexible reorganization.
Features full-multiplexing communication, allowing nodes to send and receive data from all other nodes simultaneously without interference.
Ideal for swarming drones, Internet of Things (IoT), data chains, remote control, data collection, artificial intelligence, and military equipment applications.
Model | RF Power | Network Scale | Frequency Bands |
---|---|---|---|
HNC2-H400-500mW | 500mW | Max. 1024 nodes, up to 16 hops | 430~450MHz |
HNC2-H800-500mW | 500mW | Max. 1024 nodes, up to 16 hops | 820~854MHz |
HNC2-H900-500mW | 500mW | Max. 1024 nodes, up to 16 hops | 900~940MHz |
HNC2-F400-500mW | 500mW | Max. 256 nodes, up to 3 hops | 430~450MHz |
HNC2-F800-500mW | 500mW | Max. 256 nodes, up to 3 hops | 820~854MHz |
HNC2-F900-500mW | 500mW | Max. 256 nodes, up to 3 hops | 900~940MHz |
Specification | Value |
---|---|
Model Number | HNC2-500mW |
Frequency | Different models support different frequency bands (see models table) |
Bandwidths | 1MHz/500kHz/250kHz/125kHz selectable |
Number of nodes and hops | Maximum 1024 nodes up to 16 hops or 256 nodes up to 3 hops (see models table) |
Frequency hopping speed | 1MHz: Over 1800 times per second 500kHz: Over 900 times per second 250kHz: Over 450 times per second 125kHz: Over 225 times per second |
Effective data rate | 1MHz: Up to 735kbps 500kHz: Up to 370kbps 250kHz: Up to 185kbps 125kHz: Up to 92kbps |
Full-multiplexing communication | Support |
Air-to-ground LOS (light of sight) distance | ≥30km |
Centerless self-organized network | Support |
Network construction time | Within 1 second |
Wireless transmission delay | Minimum 2ms |
Dynamic topology | Support |
RF power | 500mW (27dBm) |
Sensitivity | 125kHz: -114dBm 250kHz: -111dBm 500kHz: -108dBm 1MHz: -105dBm |
Frequency stability | ≤1ppm |
Modulation | QPSK modulation LDPC coding |
Encryption | 128-bit encryption |
Low power consumption | Less than 1W when receiving, less than 4W when transmitting, average working power consumption less than 2.5W |
Operating voltage | 24V as default, supports a wide voltage input of 7-36V |
Operating temperature | -40~+85°C |
Dimensions | 53*53*17.3mm |
Weight | 65g |
I/O | Description |
---|---|
Power-in | Power-input, XT30PW-M connector |
Dip-switch | Dial switch, switch between configuration mode and transparent transmission mode |
Uart 1 | Configure/transparent data serial port 1, TTL 3.3V level as default, optional RS232 or RS422 serial port |
Uart 2 | Transparent data serial port 2, TTL 3.3V level as default, optional RS232 or RS422 serial port |
ANT | SMA female, antenna port, required antenna impedance is 50Ω |
PWR-LED | Red, power input status indicator LED, continuous light on when power input is normal |
RX-LED | Green, data receiving indicator LED, briefly lit during power on self-test, light on when receiving data |
TX-LED | Green, data transmitting indicator LED, briefly lit during power on self-test, light on when transmitting data |
CA-LED | Blue, interference indicator LED, briefly lit during power on self-test, frequently lit in configuration mode. In transparent transmission mode: When the light is on, there is interference with the air interface, and the brighter the light, the stronger the interference. |
Contact Person: Miss. Angela
Tel: +8613714176982