Product Details:
Contact Now
Chat Now
|
Modulation: | TDD OFDM | Frequency: | 806~826MHz,1428~1468MHz,1420~1530MHz |
---|---|---|---|
Bandwidths: | 1.4/3/5/10/20MHz | Throughput: | Maximum 30Mbps@20MHz |
Sensitivity: | -108dBm(1Mbps) | RF Transmissioin Power: | 2W Or 5W |
Highlight: | 80km data link transmitter,FHSS data link transmitter,FHSS wireless data transmitter |
HCL536 Video Data Link was designed for video data wireless transmission with two-way wireless data link. It works at 800MHz or 1.4GHz bands, with frequency hopping spread spectrum automatic technology (FHSS) to ensure stable signal communication.
Attribute | Value |
---|---|
Modulation | TDD OFDM |
Frequency | 806~826MHz, 1428~1468MHz, 1420~1530MHz |
FHSS | Support |
Bandwidths | 1.4/3/5/10/20MHz |
Throughput | Maximum 30Mbps@20MHz |
RF Transmission Power | 2W or 5W |
Constellation | QPSK,16QAM,64QAM self adaption |
Sensitivity | -108dBm(1Mbps) |
Ethernet ports | 2 * Ethernet ports |
Serial ports | 3 channels, 3*RS232, 3*TTL or 2*RS232/TTL + 1*Sbus |
Transmission Range | 22~100km (UAV to Ground) |
Management | Web UI and Control Uart |
Encryption | AES128 |
Networking Mode | Point to Point, Point to Multipoint, Relay, Mesh |
Movement Speed | Support no less than 300km/h |
Power Input | 12~18V(2W), 24~28V(5W) |
Power Consumption | <12W(RF Power 2W), <22W(RF Power 5W) |
Dimensions | 103.4*61.4*22mm |
Weight | 142g |
Port | Description |
---|---|
Ethernet 1 | 4Pin ZH1.5mm connector, bridged with Ethernet2 |
Ethernet 2 | RJ45 connector, bridged with Ethernet1 |
Uart* 3 | 3Pin GH1.25mm lockable connector*3, 3 channel uart, RS232/TTL/Sbus optional |
Power in | XT30PW-M connector |
ANT 1 | Tx/Rx Antenna port, SMA female |
ANT 2 | Rx Antenna port, SMA female |
HCL536 video data link supports 2 operating modes: Access Node or Central Node. It can be managed through web UI and supports up to 16 Access Nodes connected to a Central Node. All nodes share the entire transmission bandwidth (maximum 30 Mbps @ 20 MHz throughput).
The data from the central node to the access node is referred to as downlink, while the data from the access node to the central node is called uplink. The ratio of uplink and downlink data streams can be controlled through the Web UI.
HCL536 supports multiple networking modes:
Link LED | Wireless link status |
---|---|
No light | This node is not connected with the wireless network |
Red light | The wireless link signal is weak |
Orange light | The wireless link signal is in middle |
Green light | The wireless link signal is strong |
Contact Person: Miss. Angela
Tel: +8613714176982