제품 소개RF 전력 증폭기

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

고객 검토
내가 프랑스로 갈 수 있는 것은 당신이 우리를 돌보고 있다는 것을 편안하게 생각하기 때문입니다.

—— 로저 D 쿠퍼

정말 많은 도움을 받았어요

—— 데이비드 에드리

당신은 사랑스럽고 지지적이에요, 모두 고마워요.

—— 알리

제가 지금 온라인 채팅 해요

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

큰 이미지 :  TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

제품 상세 정보:
원래 장소: 중국
브랜드 이름: Hincn
모델 번호: HCP2-4040
결제 및 배송 조건:
최소 주문 수량: 1 PC
가격: US$268.00~US$298.00
포장 세부 사항: 상자 패키지
배달 시간: 7 ~ 14 영업일
지불 조건: , T/T, Western Union, MoneyGram, D/P, D/A, L/C.
공급 능력: 315pcs/월
접촉 지금 챗팅하세요

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

설명
출력 전원: 2W/ 5W/ 10W 빈도: 160MHz ~ 2700MHz
크기: 40*40*12mm 전원 공급 장치 전압: 12 ~ 28V
재료: 원료 알루미늄 RF 커넥터: SMA 또는 MCX
강조하다:

COFDM RF power amplifier module

,

bidirectional RF amplifier 2W 10W

,

1.4GHz RF power amplifier with warranty

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
TDD COFDM 2W 5W 10W 1.4GHz 1.5GHz Band Bidirectional RF Power Amplifier Module
Brief Introduction
Time-division frequency-sharing networking with low-noise amplifier, 2W, 5W, 10W digital power amplifier modules. Size is 40*40*12mm, suitable for connecting with our TDD wireless video data transmitter to increase power and achieve long-distance transmission.
Specifications
  • Model number: HCP2-4040
  • Product name: TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
  • High linearity
  • Frequency range: 1420~1530MHz or other frequencies
  • Gain: ≥17dB±1dB@28V or 12dB@12V
  • Shoulder ratio: ≥40dB@2.0W@28V, ≥31dB@5W@28V, ≥20dB@10W@28V (DVB-T 2/8K mode modulation signal, Deviation from the center frequency 4.3MHz)
  • In-band fluctuations: ≤ ±1dB (typical value±0.5dB)
  • Input/output interface: SMA or MCX, IPEX for bare board
  • Maximum input power: 30dBm
  • Third order intermodulation: ≤40dB@Pout=33dBm@28V ≤30dB@37dBm@28V
  • ACPR: ≤40dB@Pout=33dBm@28V ≤30dB@37dBm@28V (Test in the ±4.3 MHz range outside the frequency band)
  • Harmonic suppression: ≥-30dBc@ Pout=33~40dBm@28V
  • Input VSWR: ≤2 (load 50Ω)/ Output standing wave ratio: ≤1.5 (load 50Ω)
  • Relative group delay: ≤20ns
  • RF switch switching time: turn on time≤1us / switch off time ≤0.2us
  • Power amplifier transmit-receive isolation degree: ≥40dB
  • Receive gain: 2~3dB (or 10-13dB,with internal low-noise amplifier), or 10dB@10~50MHz narrowband bandwidth with built-in acoustic wave filter
  • Control level: TTL level, 1.8~5V (high capability, or customized version: Automatic detection of transmission input exceeding 15 dBm enables automatic transmission and reception modes. EN 1: Power amplifier is in transmitting mode,but receiving is off. EN 0: Receiving status, but transmitting is off (power amplifier static current is less than 0.15A)
  • Working temperature: -25~+85℃
  • Supply voltage: 12~28V
  • Working current: 28V/0.65A@2W, 28V/0.85A@5W, 28V/1.3A@10W
  • Volume: size with housing 40*40*12mm/ bare board size: 32.6*32.6*5mm
High linearity, extremely high reliability, no damage to the power amplifier in case of open circuit, short circuit or system self-excitation.
TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band 0
Power amplifier output 2W spectrogram
TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band 1
Power amplifier output 2W constellation diagrams and error rates

연락처 세부 사항
Hincn Limited

담당자: Miss. Angela

전화 번호: +8613714176982

회사에 직접 문의 보내기 (0 / 3000)