ホーム 製品rfの電力増幅器

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

顧客の検討
あなたがいつも私たちを気にかけてくれるので、安心してフランスに行けます。

—— ロジャー・D・クーパー

あなたは私をとても助けてくれました。私はとても満足しています。

—— David Edri

皆さんのおかげです

—— アリ

オンラインです

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

大画像 :  TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

商品の詳細:
起源の場所: 中国
ブランド名: Hincn
モデル番号: HCP2-4040
お支払配送条件:
最小注文数量: 1 PC
価格: US$268.00~US$298.00
パッケージの詳細: カートンパッケージ
受渡し時間: 7〜14営業日
支払条件: 、T/T、Western Union、MoneyGram、D/P、D/A、L/C
供給の能力: 315pcs/月
連絡先 今雑談しなさい

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band

説明
出力電力: 2W/ 5W/ 10W 頻度: 160MHz~2700MHz
サイズ: 40*40*12mm 電源電圧: 12〜28V
材料: 純粋なアルミニウム製 RFコネクタ: SMAまたはMCX
ハイライト:

COFDM RF power amplifier module

,

bidirectional RF amplifier 2W 10W

,

1.4GHz RF power amplifier with warranty

TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
TDD COFDM 2W 5W 10W 1.4GHz 1.5GHz Band Bidirectional RF Power Amplifier Module
Brief Introduction
Time-division frequency-sharing networking with low-noise amplifier, 2W, 5W, 10W digital power amplifier modules. Size is 40*40*12mm, suitable for connecting with our TDD wireless video data transmitter to increase power and achieve long-distance transmission.
Specifications
  • Model number: HCP2-4040
  • Product name: TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
  • High linearity
  • Frequency range: 1420~1530MHz or other frequencies
  • Gain: ≥17dB±1dB@28V or 12dB@12V
  • Shoulder ratio: ≥40dB@2.0W@28V, ≥31dB@5W@28V, ≥20dB@10W@28V (DVB-T 2/8K mode modulation signal, Deviation from the center frequency 4.3MHz)
  • In-band fluctuations: ≤ ±1dB (typical value±0.5dB)
  • Input/output interface: SMA or MCX, IPEX for bare board
  • Maximum input power: 30dBm
  • Third order intermodulation: ≤40dB@Pout=33dBm@28V ≤30dB@37dBm@28V
  • ACPR: ≤40dB@Pout=33dBm@28V ≤30dB@37dBm@28V (Test in the ±4.3 MHz range outside the frequency band)
  • Harmonic suppression: ≥-30dBc@ Pout=33~40dBm@28V
  • Input VSWR: ≤2 (load 50Ω)/ Output standing wave ratio: ≤1.5 (load 50Ω)
  • Relative group delay: ≤20ns
  • RF switch switching time: turn on time≤1us / switch off time ≤0.2us
  • Power amplifier transmit-receive isolation degree: ≥40dB
  • Receive gain: 2~3dB (or 10-13dB,with internal low-noise amplifier), or 10dB@10~50MHz narrowband bandwidth with built-in acoustic wave filter
  • Control level: TTL level, 1.8~5V (high capability, or customized version: Automatic detection of transmission input exceeding 15 dBm enables automatic transmission and reception modes. EN 1: Power amplifier is in transmitting mode,but receiving is off. EN 0: Receiving status, but transmitting is off (power amplifier static current is less than 0.15A)
  • Working temperature: -25~+85℃
  • Supply voltage: 12~28V
  • Working current: 28V/0.65A@2W, 28V/0.85A@5W, 28V/1.3A@10W
  • Volume: size with housing 40*40*12mm/ bare board size: 32.6*32.6*5mm
High linearity, extremely high reliability, no damage to the power amplifier in case of open circuit, short circuit or system self-excitation.
TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band 0
Power amplifier output 2W spectrogram
TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band 1
Power amplifier output 2W constellation diagrams and error rates

連絡先の詳細
Hincn Limited

コンタクトパーソン: Miss. Angela

電話番号: +8613714176982

私達に直接お問い合わせを送信 (0 / 3000)