30km Long Range Satellite UAV Data Link Wireless Transmitter Telemetry Radio 500mW RF

• Supports wireless link rates up to 735 kbps
• Point-to-Point, Point-to-Multipoint, Multipoint-to-Point and Mesh topologies supported
• Supports Mesh network with up to 1024 nodes
• High sensitivity: -114 dBm at 125kHz data rate
• Frequency Hopping Spread Spectrum (FHSS) functionality

The HNC1 self-organizing network IP Mesh UAV data link enables long-distance, decentralized communication among numerous nodes. All nodes communicate independently without interference, supporting:

• Wireless transmission for densely distributed nodes
• Dynamic networking and flexible reconfiguration
• Full multiplexing communication
• Interoperability between any network nodes without central control

This 500mW transmission power system features -114dBm sensitivity, 735kbps maximum data rate, and 2ms ultra-low latency. Ideal for swarm drones, IoT, data links, remote control, military equipment, and AI applications.

The J30JZ-9PIN connector can be configured as TTL (3.3V), RS232, or RS422 UART port based on customer requirements.

Configuration options include:

• Configuration Mode: Fixed 9600 baud rate
• Data Transparent Mode: Configurable baud rates from 9600 to 921600

Recommended baud rates for optimal performance:

• 1MHz RF Bandwidth: 921600 baud
• 500kHz RF Bandwidth: 460800 baud
• 250kHz RF Bandwidth: 230400 baud
• 125kHz RF Bandwidth: 115200 baud

1. Configuration Mode: For radio parameter setup
2. Data Transparent Transmission Mode: For actual data transfer

The system includes adjustable data buffer memory to balance latency and data loss prevention. Buffer status is indicated by FU and HFU LEDs - when HFU LED illuminates, pause data transmission to prevent overflow.