|
Product Details:
Contact Now
Chat Now
|
| Air-to-ground LOS(light Of Sight) Distance: | ≥300km | High Sensitivity: | -114dBm@125kHz |
|---|---|---|---|
| RF Power: | 20W(43dBm) | Encryption: | 128-bit Encryption |
| Size: | 82.5*52*16mm | Customization: | Support |
| Highlight: | 20W UAV Data Link,Mesh Telemetry UAV Data Link,20W uas data link |
||
| Air-to-ground LOS (line of sight) distance | ≥300km |
| High sensitivity | -114dBm@125kHz |
| RF Power | 20W(43dBm) |
| Encryption | 128-bit encryption |
| Size | 82.5*52*16mm |
| Customization | Support |
The HNC1 wireless mesh drone data link enables long-distance, decentralized communication among a large number of nodes. All nodes can communicate independently without interfering with each other.
HNC1 UAV data link mesh radio supports large-scale node access, multi-hop self-organizing network, which can be used for:
| Model | RF Power | Network Scale | Frequency Bands |
|---|---|---|---|
| HNC1-H800-20W | 20W | Max. 1024 nodes, up to 16 hops | 820~854MHz |
| HNC1-H900-20W | 20W | Max. 1024 nodes, up to 16 hops | 900~940MHz |
| HNC1-F800-20W | 20W | Max. 256 nodes, up to 3 hops | 820~854MHz |
| HNC1-F900-20W | 20W | Max. 256 nodes, up to 3 hops | 900~940MHz |
| Frequency | Different models support different frequency bands (see models table above) |
| Bandwidths | 1MHz/500kHz/250kHz/125kHz selectable |
| Frequency hopping speed |
|
| Effective data rate |
|
| Full-multiplexing communication | Support |
| Air-to-ground LOS distance | ≥300km |
| Centerless self-organized network | Support centerless self-organized network, any node of the network is destroyed without affecting the communication |
| Network construction time | Within 1 second |
| Wireless transmission delay | Minimum 2ms |
| Dynamic topology | Support dynamic topology, support node joining and leaving, network topology change and deformation can be normal communication |
| RF power | 20W(43dBm) |
| Sensitivity |
|
| Frequency stability | ≤1ppm |
| Modulation | QPSK modulation LDPC coding |
| Encryption | 128-bit encryption |
| Low power consumption (varies by data rate) | Less than 1.5W(0.06A/24V) when receiving, transmission power consumption (B is in bytes):
|
| Operating voltage | 24V as default, supports a wide voltage input of 7-36V. Transmission power varies with voltage:
|
| Operating temperature | -40~+55°C |
| Dimensions | 82.5*52*16mm |
| Weight | 90.7g |
| Interface | Description |
|---|---|
| J30JZ-9PIN connector | Power-input, uart, M0 control signals |
| M1 Dipswitch | M1 control signal |
| SMA female | Antenna port, the required antenna impedance is 50Ω |
J30JZ-9PIN connector can be assembled as TTL3.3V, RS232 uart port or RS422 uart port
Contact Person: Miss. Angela
Tel: +8613714176982