Product Details:
Contact Now
Chat Now
|
Modulation: | TDD OFDM | Encryption: | AES128 |
---|---|---|---|
Management: | Web UI And Control Uart | RF Transmission Power: | 25±2 DBm+ 5W External Power Amplifier |
FHSS: | Support | OEM & ODM: | Support |
Highlight: | AES128 TDD Radio,TDD Radio Module,ODM 900mhz radio module |
HCL5-M TDD-OFDM radio module is specifically designed for video data wireless transmission with two way wireless data link. This OFDM radio module operates in the 800MHz, 1.4GHz and 2.4GHz frequency bands, and employs frequency hopping technology (FHSS) to ensure the stablity of signal transmission.
Modulation | TDD -OFDM |
---|---|
Model number | HCL5-M30 |
Frequency | 806~826MHz, 1428~1468MHz, 2402~2482MHz |
FHSS | Support |
Bandwidths | 1.4/3/5/10/20MHz |
Throughput | Maximum 30Mbps@20MHz |
RF Transmission Power | 25±2 dBm+ 5W external power amplifier |
Constellation | QPSK, 16QAM, 64QAM self adaption |
Sensitivity | -106dBm (2.4GHz 1Mbps), -108dBm (1.4GHz 1Mbps), -108dBm (800MHz 1Mbps) |
Ethernet ports | 2 * Ethernet ports for IP data transmission |
Serial ports | 3 * RS232/3 * TTL for serial data transmission |
Transmission Range | 30km~55km |
Management | Web UI and Control Uart |
Encryption | AES128 |
Networking Mode | Point to Point, Point to Multipoint, Relay, Mesh |
Power Consumption | <22W(RF Power 5W) |
Module size | 58*64*13mm |
Module Weight | 32g |
Working Temp. | -20℃ ~ +65℃ |
Storage Temp. | -40℃ ~ +80℃ |
Power in | XT30PW-M connector, DC in: 7~30V |
---|---|
Ethernet 1 | 4Pin ZH1.5mm connector |
Ethernet 2 | RJ45 connector |
Data uart1 | 3PIN ZH1.5mm connector, TTL 3.3V |
Data uart2 and uart3 | 6PIN PH1.25mm connector, uart3 works as control uart and data uart, TTL 3.3V |
Audio input and output | 4PIN PH1.25mm connector |
USB | Micro USB connector, for software upgrading |
Switch | TX/RX control signal for outside power amplifier |
Main-Antenna | TX/RX antenna port, IPEX |
Second-Antenna | RX antenna port, IPEX |
12V out | On board 12V out (<150mA), for cool fan power supply |
Power Led | Red, light on when normally powered |
Node Led | Blue, light on when the module works as central node |
Link Led | Light off - node not linked; Red - linked with weak signal; Orange - linked with medium signal; Green - linked with strong signal |
The TDD radio module supports two working modes: Access Node or Central Node. It can be managed through Web UI or AT command via uart3. This module can connect up to 16 Access Nodes to one Central Node, and all nodes share a maximum 30Mbps@20MHz throughput bandwidth. Uplink and downlink stream ratio can be controlled through web UI or AT command.
Q: This TDD-OFDM radio module seems to support IP camera, what if I want to use a camera with HDMI or SDI video output?
A: For cameras with HDMI, SDI, AHD or AV output, you'll need our mini encoder device to encode the signal for transmission. At the receiver end, connect directly to your computer or NVR. For HDMI monitor output, our decoder device can convert the digital data back to HDMI video and audio signals.
Contact Person: Miss. Angela
Tel: +8613714176982