Product Details:
Contact Now
Chat Now
|
Frequency: | 566~678MHz And 1420~1530MHz | Sensitivity: | -102dBm(1Mbps At 20MHz) |
---|---|---|---|
Network Mode: | Mesh | Power Input: | 24~30V |
OEM&ODM: | Support | Warranty: | 1 Year Warranty And Lifetime Maintenance |
Highlight: | 30V vhf uhf full duplex transceiver,1Mbps vhf uhf full duplex transceiver,24V cofdm transceiver |
Frequency | 566~678MHz and 1420~1530MHz |
Sensitivity | -102dBm(1Mbps at 20MHz) |
Network mode | Mesh |
Power input | 24~30V |
OEM&ODM | Support |
Warranty | 1 year warranty and lifetime maintenance |
The HCL605 full duplex transceiver is specifically designed for long range wireless transmission of video data. This OFDM radio operates in the 600MHz or 1.4GHz frequency bands, and employs frequency hopping spread spectrum technology (FHSS) to ensure higher stability of UAV signal communication even in rapid movement conditions.
Modulation | TDD OFDM |
Frequency | 566~678MHz and 1420~1530MHz |
Bandwidths | 1.4MHz, 3MHz, 5MHz,10MHz, 20MHz, 40MHz |
Throughput | Maximum 100Mbps |
RF transmission Power | 5W *2 (dual power supply, each 5W of the 2 antennas) |
Constellation | QPSK,16QAM,64QAM, self-adaption |
Sensitivity | -102dBm(1Mbps at 20MHz) |
IP data transmission | 3 Ethernet ports |
Serial data transmission | 1 channel RS232 or TTL |
Transmission range | 2~10km (ground to ground), maximum 100km (UAV to ground) |
Management | Through Web UI or Control UART |
Encryption | AES128-bit encryption |
Network mode | Mesh |
Movement speed | Support maximum 300km/h |
Power input | 24~30V |
Power consumption | <2A at 12V |
Dimensions | 113.9*83.7*23.3 mm |
Weight | 243g |
Ethernet | 3 channel 4Pin PH1.25mm connector, bridged inside with same IP address |
Data UART | RS232 data UART (RS232 as default, optional TTL before shipping out), 3PIN PH1.25mm connector |
Control UART | TTL control UART, 3PIN PH1.25mm connector |
Power in | XT30PW-M connector |
ANT 1 | Tx/Rx Antenna port, SMA female |
ANT 2 | Tx/Rx Antenna port, SMA female |
This HCL605 5W full duplex transceiver supports mesh network with maximum 32 nodes and shared maximum 100Mbps Iperf Throughput. We recommend the version that supports maximum 4 nodes - 2 hops and shared 60Mbps for more competitive pricing.
Contact Person: Miss. Angela
Tel: +8613714176982